CMR PRODUCT INDEX
CMR CONTROLS
22 Repton Court, Basildon,  Essex SS13 1LN, UK.  www.cmr.co.uk,  e-mail: sales@cmr.co.uk    Tel +44(0)1268287222,
Home   New Products   Sensors   Calibrators   Displays   Tubes   Air Probes   Duct Probes   Veloprobes   Flowgrids   Venturis   Controls   Valves   Dampers   Actuators   Switches   Systems   Support   Library   Map   About Us   Vacancies   e-mail us  Online Shop  Login   
English Catalogue in Pounds      ON LINE SHOP         

Veloprobes - in Stainless Steel and PPs Plastic for Air Volume measurement

Veloprobes - in Stainless Steel and PPs Plastic for Air Volume measurement




AIR VOLUME CONTROL
Veloprobes Air Volume Measurement  (Stainless)Veloprobes Air Volume Measurement (Stainless)

VPS Veloprobe data sheet ... (PDF)

CMR is the manufacturer and designer of the popular Veloprobes. All veloprobes are made to measure. They are made completely of stainless steel which means, measuring sensor pipe, connection nipples and flanges and can be supplied for ducts up to 3m x 3m. Larger ducts can be accomodated by using 50mm diameter pipe on request. The veloprobes are easily installed in new or retro-fit installations and only four 25.5 mm holes have to be cut into the duct so that the veloprobes can be mounted in the air stream to provide a differential pressure. The probes can be fitted in any position except after a controlling damper or a duct T- Piece. The veloprobes can be turned within the flange to adjust to suit the direction of airflow. The veloprobes can be made in welded construction with compression fittings to suit high temperatures and nuclear applications. They can be epoxy, Teflon or PUR coated.

Goto Veloprobes...






Veloprobes Air Volume Measurement  (PPs Plastic)Veloprobes Air Volume Measurement (PPs Plastic)

PPS Veloprobe data sheet ... (PDF)

CMR is the manufacturer and designer of the popular Veloprobes. All veloprobes are made to measure. They are made of PPs Plastic which means, measuring sensor pipe, connection nipples and flanges and can be supplied for ducts up to 1.5m x 1.5m. Larger ducts can be accomodated by using 50mm diameter pipe to have the material strength. The veloprobes are easily installed in new or retro-fit installations and only four 25.4 mm holes have to be cut into the duct so that the veloprobes can be mounted in the air stream to provide a differential pressure. The probes can be fitted in any position except after a controlling damper or a duct T- Piece. The veloprobes can be turned within the flange to adjust to suit the direction of airflow.

Goto Veloprobes...






Back to top