The DPC 100 Series of low power air pressure and air volume controllers are available with or without or built in transmitters. They incorporate the power supplies of either 24, 110 or 230VAC with an output power of 8.5 VA to drive low power damper actuatators on dampers, venturi valves and control valves. They can also control the speed of fans. The DPC 100 can be connected and operated from remote by the PLC or Building Management System via analogue signals or modbus rtu. It is equipped with one modbus rtu communication channnel only. The DPC 100 is a standalone controller and shall continue working if the BMS or PLC fails. It is just like a small outstation. Positive or negative pressure can be controlled in rooms or ducts. Alternatively, constant or variable air volume can be controlled in any type of ventilation application.
The DPC 200 Series are compact air pressure and air volume controllers withoutr or with built in precision sensors to measure static and differential pressure as well as velocity or air volume .The power supply is built in complete with fuses and 3m long power cable ready for connection to 24, 110 or 230VAC with an output power of 18 VA at 24Vac to drive any of the fast CMR motorised dampers, venturi valves and control valves. The DPC 200 Series can also control the speed of fans or any other make of actuator. All DPC 200 Series controllers can be connected and operated from remote by the PLC or Building Management System via analogue signals or modbus rtu. It is equipped with two modbus rtu communication channnels. They are stand alone controls and shall continue working if the BMS or PLC fails. It is just like a small outstation. Positive or negative pressure can be controlled in rooms or ducts. The DPCs also control constant or variable air volume in any type of ventilation application.!!
The DPC 300 Series are compact low velocity controllers which can measure and control i.e. 0..2m/s. It is especially designed for the Fume Hood Sash Face velocity and extract air volume control. They incorporate one low velocity sensor 0..2m/s and one air volume or pressure sensor for the total extract volume control. Power supplies of either 24, 110 or 230VAC with an output of 18VA are standard to drive any of the CMR fast motorised dampers, venturi valves and control valves. The DPC 320 have sash height warning, automatic sash open and close drive commands, velocity alarms and emergency exhaust function. They can also control the speed of extract fans. All controllers can be connected and operated from remote by the BMS or PLC via analogue signals or modbus rtu. It is equipped with two modbus rtu communication channnels.They are stand alone controls and shall continue working if the BMS or PLC fails. It is just like a small outstation.
The DPC 500 Series is a powerful air pressure and air volume controller which is available without or with built in transmitters of any range. They incorporate the power supplies of either 24, 110 or 230VAC with an output power of 48 VA to drive any of the CMR motorised dampers, venturi valves and control valves. They can also incorporate E/P converters to drive pneumatic actuators. The speed of fans or any other actuator can also be controlled. All controllers can be connected and operated from remote by the BMS or PLC via analogue signals or modbus rtu. It is equipped with two modbus rtu communication channnels.The DPC 500 series are stand alone controllers and shall continue working if the BMS or PLC fails. It is just like a small outstation. Low velocities, positive or negative pressure as well as constant or variable air volume can be controlled in any type of ventilation application.
All DPCs have built in connectors to connect an additional Keyboard Display for the remote Operator to see the status of the control and also to make adjustments such as calibration and maintenance. All keyboards are password protected and can be connected via modbus at a long distance. The keyboard is a replica of the keyboard which is built into the front lid of the DPC and all parameters can be reached from there. The keyboard can be supplied as horizonal or vertical. Customs operator panels can be made by CMR to suite any site architecture and colours. There are three LEDs built in to indicate healthy (green), warning (amber) or alarm (red).
This website uses essential cookies to provide a stabile operation, saving your IP in an anonymised form with the date and settings, take and fulfill enquiries - quotations and orders and only disclose information to third-parties for goods delivery purposes and payment transactions. This site does not normally use 'Analytical' or 'Marketing' cookies to function and therefore they are not necessary and shall not enhance the functions. However, they can be selected independently.
ON LINE SHOP
