 | Air Pressure and Volume Transmitters - Displays and Alarms for industrial Ventilation Systems
|
 | PV-110 Pressure - Volume Transmitter
The PV-110 Transmitters are high precision differential low air pressure and volume transmitters for use in commercial ventilation systems, Laboratory and Clean Room installations. The Transmitters have a linear output to pressure or air volume. They work with all CMR duct mounted veloprobes, flowprobes, flowgrids and Venturis. A green and red alarm led for high or low alarm is standard. Signal outputs of 0..10Vand 4..20mA as well as modbus is fitted for connection to PLC's or Building Management Systems. Calibration certificates traceable to International Standards are supplied..
Goto PV-110 Series Transmitters...
|
 | PV-210 Pressure - Volume Transmitter
The PV-210 Transmitters are high precision differential low air pressure and volume Transmitters for use in commercial ventilation systems, Laboratory and Clean Room installations. The transmitters have a linear output to pressure or air volume and have also a PID control function. They work with all CMR duct mounted veloprobes, flowprobes, flowgrids and Venturis. An alarm change over relay contact and a buzzer for high or low alarm is standard. A CMR remote display can be connected via an independent modbus. Standard output signals such as 0..10V, 4..20mA and a modbus rtu is fitted for connection to PLC's or Building Management systems.Calibration certificates traceable to International Standards are supplied. Heavy duty aluminium enclosures and compression fittings for Industrial Applications are available.
Goto PV-210 Series Transmitters...
|
 | DPM-110 Pressure - Volume Transmitter
The DPM-110 panel mount high accuracy air pressure and air volume transmitters are used in commercial or industrial ventilation systems. They have been designed for use in pressure and flow monitoring as well as control applications and the PVC tubing can run up to 200m. The transmitters have linear pressure or volume output signals and have also a PID control function. They work with all CMR duct mounted veloprobes, flowprobes, flowgrids and Venturis. A CMR remote display can be connected via an independent modbus. Standard output signals of 0..10V, 4..20mA and a modbus rtu is fitted for connection to PLC's or Building Management systems. Two alarm change over relay contacts for high or low alarm are standard. The instrument is ideal for central monitoring applications where regular calibration is carried out. Calibration certificates traceable to International Standards are supplied.
Goto DPM-110 SeriesTransmitters...
|
 | DIS-120 Remote Pressure, Velocity or Volume Display
The remote DIS-120 LED display can be connected to the PV-210, PV-220 and PV-230 as well as the DPM-110 transmitters. The connection is via modbus and the power supply comes directly from the tranmitters. The displays have also analogue inputs such as 0..10V or 4..20mA. The scaling can also be adjusted via push button switches on the rear of the unit if it is not fitted to a CMR Sensor. The display can be used for any application such as pressure, air volume, air velocity, temperature or humidity indication. A buzzer is fitted on the board as well as a mute input. The display is mounted on a stainless steel plate with or without mute button or any custom made panel.
Goto DIS Series Remote Displays...
|
 | LED-225 Remote Alarm Multi colour indicators
A complete range of custom made alarm Plates in either 25mm or 50mm LED squares are manufactured and mounted into stainless steel flush mount plates. The special laser edging instead of deep engraving makes this product ideal for clean rooms. The plates can be washed down and kept particle free. The alarm light plate can be connected to any control panel which has a 24VAC or DC supply. There are a variety of plates such as a single, two way, four way LED as well as custom manufactured indicators for specific applications. A buzzer and a mute input is on board starting from the two way plate.
Goto LED Indicators...
|
|
